Skip to sections.
Aug. 23, 2007
TOKYO – Nikon Corporation is pleased to announce the introduction of Wireless Transmitter WT-4, that enables image transfer and camera control from a computer connected with a camera via USB cable, and remote-control software Camera Control Pro 2.
The WT-4, when connected with the D3 or D300, permits image transfer to a computer connected wirelessly or using Ethernet cable, or to an FTP server. Wireless printing is also made possible via computer. Furthermore, the newly added Thumbnail Select mode realizes wireless transfer of images to a computer taken with several cameras connected to the WT-4.
Camera Control Pro 2 enables adjustment of various settings of Nikon digital SLRs from a computer, and saves them. In addition to the functions of Camera Control Pro introduced in 2006, Camera Control Pro 2 supports various functions of the Nikon D3 and D300 such as Preview prior to transfer to a computer, Liveview and Picture Control System. Thumbnail display function is also available. With these advanced features, Camera Control Pro 2 is essential software for studio shooting, etc.
When using Camera Control Pro 2 with the WT-4 set in PC mode, camera operation can be controlled from a connected computer. This is convenient in large-volume studio shooting for confirming images on a computer display.
The WT-4 is a high-performance wireless transmitter that offers diversified image transfer capabilities when connected with the Nikon D3 or D300 via USB cable. It supports wireless LAN conforming to IEEE 802.11b/g, IEEE 802.11a, and wired LAN conforming to IEEE 802.3u (100BASE-TX) and IEEE 802.3 (10BASE-T). Transmission range when wireless LAN is used is approx. 180 m (IEEE 802.11b/g) or 260 m (IEEE 802.11a). (Varies according to transmission conditions.)
External dimensions are approx. 125 (W) x 65 (H) x 35 (D) mm, and weight is 131 g (body only). In order to maintain operability of a camera, the WT-4 is not directly mounted on the camera bottom, but is connected via a cable.
A soft case that can be attached to a belt and a neck-strap are supplied as standard accessories.
With wireless LAN, IEEE 802.11b/g and 11a are supported. With wired LAN, IEEE 802.3u (100BASE-TX) and IEEE 802.3 (10BASE-T) are supported.
With wireless LAN, transmission range is approx. 180 m (IEEE 802.11b/g) and 260 m (IEEE 802.11a). (The range varies according to obstacles and radio wave conditions.)
Ad-hoc mode enables peer-to-peer connection of a WT-4 and a computer or FTP server. Infrastructure mode enables connection via an access point.
When the Nikon D3 or D300 is connected with the WT-4 via USB cable, several cameras can be wirelessly connected with a computer.
This mode permits thumbnail display of images taken with up to five wirelessly connected cameras on a computer display. Images selected by confirming the thumbnail can be downloaded and saved on the computer. With this mode, both photographer and computer operator can concentrate on their own assignment.
*Supplied software “Thumbnail Selector” should be pre-installed.
| Compatible cameras | Nikon digital SLR D3/D300 |
|---|---|
| Power source | One Rechargeable Li-ion Battery EN-EL3e (optional) or AC Adapter EH-6 (optional) |
| OS (when connected with a computer) | 32-bit Windows Vista Home Basic / Home Premium / Business / Enterprise / Ultimate, Windows XP Professional / Home Edition (SP1 or later, SP2 recommended, pre-installed models), Mac OS X (Ver. 10.3.9, 10.4, PowerPC G4 / G5 CPU, models with Intel processor) |
| OS (when connected with an FTP server) | Operation guaranteed OS*1: Windows Vista / Ultimate / Business / Enterprise, Windows XP Professional, Mac OS X（Ver. 10.3.9, 10.4） |
| Transfer equipment (when wireless LAN is used) | Wireless LAN adapter equipped with a computer or externally connected, or wireless LAN access point (complaint with IEEE 802.11b, IEEE 802.11g or IEEE 802.11a) |
| Transfer equipment (when Ethernet is used) | • Ethernet port equipped with a computer or externally connected (compliant with 100BASE-TX, 10BASE-T) • Compatible Ethernet cable (compliant with 100BASE-TX, 10BASE-T) |
| Others | • Supplied WT-4 Setup Utility software is required when setting information in a camera on computer or FTP server*2 to be connected • Supplied thumbnail selector software is required when setting thumbnail select mode • CD-ROM drive (used when installing WT-4 Setup Utility/thumbnail selector software) • USB port*3 equipped with a computer and optional USB cable (used when setting information on a device to be connected using WT-4 Setup Utility) |
| Model name | WT-4 |
| Wireless LAN environment | |
|---|---|
| Compatible standards | IEEE 802.11a (J52/W52/W53), IEEE 802.11g, IEEE 802.11b ARIB STD-T66, ARIB STD-T71 |
| Transfer | IEEE 802.11a: OFDM IEEE 802.11g: OFDM IEEE 802.11b: DBPSK, DQPSK, CCK |
| Frequency range (center frequency) | 5170 ~ 5320 MHz (J52: 4 channels in all, W52/W53: 8 channels in all) 2412 ~ 2472 MHz (13 channels in all) |
| Transmission range | IEEE802.11a: Approximately 260 m IEEE802.11b/g: Approximately 180 m (when a large antenna is equipped at wireless LAN access point) (Range varies according to obstacles and radiowave conditions) |
| Data transfer speed (nominal value*) | IEEE 802.11a: 54M/48M/36M/24M/18M/12M/9M/6M (bps) IEEE 802.11g: 54M/48M/36M/24M/18M/12M/9M/6M (bps) IEEE 802.11b: 11M/5.5M/2M/1M (bps) 128/64 bit WEP, TKIP, AES |
| Security access method | Infrastructure mode/Ad-hoc mode |
| Ethernet (wired LAN) environment | |
| Standards | IEEE 802.3u (100BASE-TX)/IEEE 802.3 (10BASE-T) |
| Data transfer speed (nominal value*) |
10/100 Mbps (auto recognition) |
| Port | 100BASE-TX/10BASE-T combined port (AUTO-MDIX) |
| Communications protocol | PTP-IP, FTP |
| Power consumption | Max. 4.5 W |
| Power source | One Rechargeable Li-ion Battery EN-EL3e (optional) AC Adapter EH-6 (optional) |
| Operating environment | Temperature: 0 ~ 40°C, Humidity: under 85% (no condensation) |
| Dimensions | Approx. 125 (W) x 65 (H) x 35 (D) mm |
| Weight | Approx. 131 g (body only) |
This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to transfer to a computer, Liveview function and Picture Control System are supported. It also supports workflows of Nikon’s exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX.
In addition to the D3 and D300, Camera Control Pro 2 is compatible with the Nikon D2 series, D1 series, D200, D100, D80, D70 series, D50 and D40 series. An upgraded version of the current Camera Control Pro will also be released simultaneously.
Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter.
In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed.
Viewer function enables thumbnail display of images stored in a computer.
| D3, D300 | Supports wired or wireless LAN when used with Wireless Transmitter WT-4. |
|---|---|
| D2 series (D2H, D2X, D2HS, D2XS) D1 series (D1, D1H, D1X | D2X/D2HS/D2XS support wireless LAN when used with the WT-2. Windows Vista support currently not available Intel Mac: only Mac OS 10.4.9 supported |
| D200, D100, D80, D70 series (D70, D70S), D50, D40 series (D40, D40X) | D200 supports wired or wireless LAN when used with the WT-3. |
| Windows | |
|---|---|
| CPU | 1 GHz or higher Intel Celeron/Pentium 4/Core series |
| OS | Pre-installed versions of Windows Vista (Home Basic/Home Premium/Business/Enterprise/Ultimate) Windows XP Home Edition/Professional (SP2), Windows 2000 Professional (SP4) |
| RAM | 256 MB or more (512 MB or more with Windows Vista), 768 MB or more recommended |
| Hard disk | Requires 1 GB or more for running |
| Monitor | 1,024 x 768 pixels or more 24-bit color (True Color) or more |
| Interface* | USB: Only built-in USB ports supported IEEE 1394: Only OHCI-compliant boards supported |
| Miscellaneous | • CD-ROM drive required for installation • Internet connection may be required • IEEE 1394 connection (D1 series) not supported with Windows Vista |
* Operation when connected with USB hub or IEEE 1394 hub is not guaranteed.
| Macintosh | |
|---|---|
| CPU | 1 GHz or higher Power PC G4/G5, Intel Core series/Xeon series |
| OS | Mac OS X 10.3.9, 10.4.10 |
| RAM | 256 MB or more (768 MB or more recommended) |
| Hard disk | Requires 1 GB or more for running |
| Monitor | 1,024 x 768 pixels or more 24-bit color (True Color) or more |
| Interface* | USB: Only built-in USB ports supported Firewire: Only Firewire ports supported |
| Miscellaneous | • CD-ROM drive required for installation • Internet connection may be required • IEEE 1394 connection (D1 series) not supported with Macintosh with Intel processors |
* Operation when connected with USB hub or IEEE 1394 hub is not guaranteed.
