Macro Confocal Microscope System

AZ-C2+

  1. Key Features
  2. Specifications/Dimensions
AZ100 optical zoom 1-8x (zoom ratio 8 : 1)
C2+ confocal scan zoom 1x-1000x (continuous variable)
Stand AZ-STE EPI stand/AZ-STD DIA stand Focus range: 85 mm stroke
Coarse focus: 18.5 mm/rotation
Fine focus: 3.27 mm/rotation
Stage focus: 10 mm range with 0.27 mm/rotation
Under software control with remote focus accessory
Objective AZ-Plan Apochromat 0.5x (NA 0.05/W.D. 54 mm), AZ-Plan Apochromat 1x (NA 0.1/W.D. 35 mm), AZ-Plan Fluor 2x (NA 0.2/W.D. 45 mm), AZ-Plan Apochromat 4x (NA 0.4/W.D. 20 mm), AZ-Plan Fluor 5x (NA 0.5/W.D. 15 mm)
Laser unit LU-N3: installed laser 405 nm, 488 nm, and 561 nm
LU-N4/N4S: installed laser 405 nm, 488 nm, 561 nm, and 640 nm
LU-NV series: mountable laser 405 nm, 445 nm, 458 nm, 488 nm, 514 nm, 532 nm, 561 nm, 594 nm, 640 nm and 647 nm
Standard fluorescence detector Number of channels 3 channels
Display mode 160 x 160 to 2048 x 2048 pixels
Scanning speed Standard mode:2 fps (512 x 512 pixels, bi-direction)
Zoom:1-1000x
Fast mode:8 fps (512 x 512 pixels, bi-direction)
Zoom:8-1000x
Spectral detector (C2si+) Number of channels 32 channels
1st dichroic mirror 20/80 beam splitter
Corresponding wavelength 400-750 nm
Wavelength resolution 2.5/5/10 nm (switchable)
Minimum wavelength step 0.25 nm
Display mode 160 x 160 to 1024 x 1024 pixels
Scanning speed Standard: 0.5 fps (512 x 512 pixels, 32 channel simultaneous recording )
Power Confocal system (PC, monitor, C2+ controller, AOM controller): Approx. 830 W (single phase AC 115 V, 7.2 A / AC 230 V, 3.6 A, with earth)
(Does not include microscopes and lasers.)

Related Products