Product name
Three models with different build sizes are offered on a common platform, allowing for the expansion of production lines according to demand
November 18, 2026
Nikon Corporation is pleased to announce that it will launch the “MACHX series” of L-PBF*1 metal 3D printers, developed by its subsidiary Nikon SLM Solutions AG (hereinafter referred to as NSLM), in a phased release starting in June 2027.
The MACHX series is a new product line developed to maximize productivity, featuring three models with different build sizes on a common platform. Targeting fields such as general industry, automotive, and aerospace, it supports the continuous production of metal parts.
Featuring a maximum total laser output of 8 kW, a unique optical system jointly developed with Nikon, and a minimum setup time of 25 minutes, this system achieves a space-saving design through an integrated powder management system. With high expandability, including the ability to increase laser output and add an automatic cylinder exchange mechanism (optional), it can be used to build a mass production system for metal additive manufacturing to meet production demands.
Nikon’s Vision is to be a key technology solutions company in a global society where humans and machines co-create seamlessly, and its current medium-term management plan designates large-format metal 3D printers as a key area of focus. Building on more than a century of applied optics technologies, Nikon will innovate manufacturing through digital manufacturing.
*1 Laser Powder Bed Fusion
|
Product name |
MACHX 450, MACHX 450C, MACHX 450E |
|---|---|
|
Sales launch |
June 2027 (Europe and the US) *In Japan, release will follow sequentially after Europe and the US. |
In the field of metal additive manufacturing, improving the printing speed has been the main competitive factor until now. However, as its introduction into mass production processes progresses, manufacturers are increasingly prioritizing not only printing speed, but also production volume per unit area, stability, and the ability to expand equipment to meet production demands.
To meet these needs, NSLM developed the MACHX series based on the concept of “throughput density”. This concept indicates how much production can be achieved per unit of equipment footprint.
The MACHX series is designed to make efficient use of existing factory space while allowing for gradual expansion of equipment as production volume increases. By flexibly adding necessary functions and units, it contributes to continuous improvement of production capacity.
The MACHX series consists of three models that share a common modular design.
Swipe horizontally to view full table.
|
|
Build size (XYZ) |
Intended Use |
|---|---|---|
|
MACHX 450 |
450 × 450 × 450 mm |
Mass production applications in general industrial fields |
|
MACHX 450C |
450 × 600 × 450 mm |
Long, flat parts such as automotive components. |
|
MACHX 450E |
450 × 450 × 1,000 mm |
Long parts such as rocket engine chambers |
Because the platform, software, and processes are common across the three models, application parameters and other settings can be applied to other models as well.
The MACHX series allows for gradual increases in the number of lasers, enhancements in laser output, automation features, and additional units to match increased production volume. Furthermore, its modular design allows for post-installation upgrades of lasers and monitoring functions.
The automatic cylinder exchange mechanism (optional) enables preheating of the next build cylinder while the current job is still in process so that next job could be started right after build chamber exchange to minimize downtime. Subsequently, build surface monitoring technology (optional) automatically controls the thickness of the first build layer, allowing the next build to begin just 25 minutes after the previous one finishes.
Because the interfaces for the automatic powder circulation and powder removal systems are standardized, multiple MACHX series units can be efficiently operated in a single powder removal system. In addition, a 230 L universal powder tank supports long-running continuous production.
The MACHX series is designed to maximize productivity with a compact footprint.
The MACHX 450E offers a build volume of approximately 200 liters in an installation area of approximately 13 m2*2. This allows for efficient use of existing factory space, and when increasing production capacity, the system can be added without the need to expand or build a new factory.
*2 Including the space required for delivery and installation using a crane or other equipment, approximately 42 m2 of working space is required.
The MACHX series offers two configurations to deliver up to 8 kW of total output: a 1 kW Gaussian-beam laser system with four (or eight) modules that precisely control beam diameters from 80 to 500 µm using zoom and defocus to ensure stability and repeatability, and a 2 kW beam-shaping laser system with four modules that cover a broader 80 to 760 µm range to optimize productivity and feature accuracy with advanced galvano control, while our proprietary optical system stabilizes each laser module at up to 2 kW and enables fine beam-diameter adjustments and shape optimization to meet material and part requirements.
As laser power increases, so does the heat input during printing. The MACHX series employs interchangeable build plate packages that accommodate different temperature ranges.
The low-temperature package features a water-cooling function for the build chamber in the 80-200°C temperature range, achieving approximately eight times the cooling performance of conventional systems (NXG series). The medium-temperature package is planned to support the 200-450°C temperature range.
Sensors positioned beneath the build plate, a liquid-cooled process chamber, and temperature control functions for the built parts ensure that all parts on the build plate have the same thermal history during each production run.
NSLM’s SLMX integrated manufacturing process system enables management of the MACHX series. SLMX integrates thermal control, simulation, layer state monitoring, and process management to ensure consistent quality and performance from the initial print run to the mass production phase.
Swipe horizontally to view full table.
| MACHX 450 | MACHX 450C | MACHX 450E | |
|---|---|---|---|
| Dimensions (W x D x H) | 6,080 x 2,100 x 3,500 mm | 6,080 x 2,100 x 3,500 mm | 6,080 x 2,100 x 4,050 mm |
| Maximum processing dimensions (XYZ) | 450 × 450 × 450 mm | 450 × 600 × 450 mm | 450 × 450 × 1,000 mm |
| Laser output | 1 kW x 4 or 8-laser system, or 2 kW x 4-laser system, for a maximum total of 8 kW | ||
| Compatible metal materials | Nickel-based alloys, tool steel, stainless steel, titanium alloys, copper alloys, aluminum alloys | ||
The information is current as of the date of publication. It is subject to change without notice.